BA Taps

This page lists our range of BA taps including taper, second and bottom taps.
Also listed below are tap wrenches suitable for use with these taps.

We stock the usual even number sizes i.e. 12BA, 10BA, 8BA, 6BA, 4BA and 2BA, and now also odd number sizes including 1BA, 3BA and 5BA

Other thread forms also available including Metric Coarse, Metric fine, UNC sizes, UNF, BSF, BSW, BSP, NPT, Model Engineer - please click on the thread name to go to the relevant page, or e mail us with your requirements.

Please note that these are high quality professional standard taps that with correct care and use will give many years of service. Not to be confused with the cheaper and inferior 'market stall' quality tools that are available from some sources and are good for a couple of holes and completely useless when used with certain materials.

All our taps and dies are manufactured from HSS (High Speed Steel) or HQS (a manufacturers brand name for HSS with improved toughness properties)We do not stock low grade carbon steel taps and dies.

These taps are suitable for working with a large range of hard and soft ferrous and non-ferrous metals including stainless steel.

If you have any queries regarding the type of tap you need for a particular job, please do not hesitate to send your questions by e mail to us and we will do our very best to assist.

		BA Taps & Tap Drills
Thread	Tap type	MF Ref	Price Each

Sorry - 12BA taps are currently out of stock Please e mail us for current expected availability dates for this item
12BA	Taper	MF-T12BAT	£19.50
12BA	Second	MF-T12BAS	£19.50
12BA	Bottom	MF-T12BAB	£19.50
12BA	Set of 3 Taps	MF-T12BA3	£52.65
1.05mm	Tap Drill for 12BA	MF-DB-105	£3.06

10BA	Taper	MF-T10BAT	£14.15
10BA	Second	MF-T10BAS	£14.15
10BA	Bottom	MF-T10BAB	£14.15
10BA	Set of 3 Taps	MF-T10BA3	£38.20
1.4mm	Tap Drill for 10BA	MF-DB-014	£1.56

8BA	Taper	MF-T8BAT	£11.20
8BA	Second	MF-T8BAS	£11.20
8BA	Bottom	MF-T8BAB	£11.20
8BA	Set of 3 Taps	MF-T8BA3	£30.25
1.8mm	Tap Drill for 8BA	MF-DB-018	£1.50

6BA	Taper	MF-T6BAT	£6.50
6BA	Second	MF-T6BAS	£6.50
6BA	Bottom	MF-T6BAB	£6.50
6BA	Set of 3 Taps	MF-T6BA3	£17.55
2.3mm	Tap drill for 6BA	MF-DB-023	£1.44

5BA	Taper	MF-T5BAT	£9.75
5BA	Second	MF-T5BAS	£9.75
5BA	Bottom	MF-T5BAB	£9.75
5BA	Set of 3 Taps	MF-T5BAS3	£26.35
2.65mm	Tap Drill for 5BA	MF-DB-265	£2.22

4BA	Taper	MF-T4BAT	£6.50
4BA	Second	MF-T4BAS	£6.50
4BA	Bottom	MF-T4BAB	£6.50
4BA	Set of 3 Taps	MF-T4BAS3	£17.55
3.0mm	Tap drill for 4BA	MF-DB-030	£1.20

3BA	Taper	MF-T3BAT	£7.20
3BA	Second	MF-T3BAS	£7.20
3BA	Bottom	MF-T3BAB	£7.20
3BA	Set of 3 Taps	MF-T3BAS3	£19.45
3.4mm	Tap Drill for 3BA	MF-DB-034	£1.62

2BA	Taper	MF-T2BAT	£6.50
2BA	Second	MF-T2BAS	£6.50
2BA	Bottom	MF-T2BAB	£6.50
2BA	Set of 3 Taps	MF-T2BAS3	£17.55
4.0mm	Tap drill for 2BA	MF-DB-040	£1.50

1BA	Taper	MF-T1BAT	£6.50
1BA	Second	MF-T1BAS	£6.50
1BA	Bottom	MF-T1BAB	£6.50
1BA	Set of 3 Taps	MF-T1BAS3	£17.55
4.5mm	Tap drill for 1BA	MF-DB-045	£1.68

Tap Wrenches
	Range	MF Ref	Price Each
	2-5mm	MF-TW3	£5.55
Tee Handled Tap Wrench with chuck suitable for taps from M2 to M4, No 4 to No8 UNC and 8BA to 4BA. Especially suited for use with the smaller diameter taps

Sorry, this item is temporarily out of stock
	2-6mm	MF-TW1	~~£6.00~~ £4.95
Traditional Bar Style Tap Wrench (110mm long) suitable for taps from M2 to M6, No4 to 1/4" UNC/UNF, and 8BA to 2BA. Please note that the image is typical - colours may vary

Send mail to webmaster@modelfixings.com with questions or comments about this web site. General & Sales Information: info@modelfixings.com

Send mail to webmaster@modelfixings.com with questions or comments about this web site.
General & Sales Information: info@modelfixings.com