|
This page lists our range of metric taps from M2
to M8 including taper, second and bottom taps.
Also listed below are tap wrenches suitable for use with these taps.
The taps listed are standard coarse thread (with the
exception of M6x0.75 fine thread listed at the bottom of the page). Other thread
forms also available including metric fine, UNC,
UNF, BSF,
BSW, BSP, NPT, Model Engineer - please click on the
thread name to go to the relevant page, or
e mail
us with your requirements.
Please note that these are high quality professional
standard taps that with correct care and use will give many years of service.
Not to be confused with the cheaper and inferior 'market stall' quality tools
that are available from some sources and are good for a couple of holes and
completely useless when used with certain materials.
All our taps and dies are manufactured from HSS (High
Speed Steel) or HQS (a manufacturers brand name for HSS with improved toughness
properties). We do not stock low grade carbon steel taps and dies.
These taps are suitable for working with a large range of
hard and soft ferrous and non-ferrous metals including stainless steel.
If you have any
queries regarding the type of tap you need for a particular job, please do not
hesitate to send your questions by e mail
to us and we will do our very best to assist.
All prices include 20% VAT
Click
here for details
 |
Metric Taps & Tap Drills |
|
Thread |
Pitch |
Tap
type |
MF Ref |
Price
Each |
|
| |
(mm) |
|
|
|
|
|
|
|
|
|
|
The M2 Tap Sets listed below,
ref MF-T203SDIN are DIN352 taps.
These should always be used in sets of three to obtain a full depth
thread as the taper and second taps will cut to only partial depth. The
bottom tap then cuts the final full depth thread. This reduces the risk
of breaking a tap which is more likely with the smaller sizes.
To aid easy identification, DIN 352 taper taps are marked with a single
ring on the shaft, seconds have 2 rings and bottom taps have no ring. |
|
|
|
|
|
|
|
M2 |
0.4 |
Set of
3 DIN352 Taps |
MF-T20S3DIN |
£16.95 |
|
|
|
|
|
|
|
|
Tapping drill for M2 (1.6mm dia) |
MF-DB-016 |
£1.32 |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
All the individual taps
below will cut full threads (providing enough penetration is available
in the case of the taper taps). We always recommend the first threads
are cut with a taper tap followed by a second, and then followed by the
bottom tap in the case of blind holes. |
| |
|
|
|
M2 |
0.4 |
Taper |
MF-T20T |
£12.48 |
|
| |
Sorry - this item is temporarily out of stock |
|
|
M2 |
0.4 |
Second |
MF-T20S |
£12.48 |
|
|
M2 |
0.4 |
Bottom |
MF-T20B |
£12.48 |
|
|
Tapping drill for M2 (1.6mm dia) |
MF-DB-016 |
£1.32 |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
M2.5 |
0.45 |
Taper |
MF-T25T |
£8.95 |
|
|
M2.5 |
0.45 |
Second |
MF-T25S |
£8.95 |
|
|
M2.5 |
0.45 |
Bottom |
MF-T25B |
£8.95 |
|
|
M2.5 |
0.45 |
Set of
3 Taps |
MF-T25S3 |
£24.15 |
|
|
Tapping drill for M2.5 (2.05mm dia) |
MF-DB-205 |
£1.62 |
|
| |
|
|
|
|
|
|
M3 |
0.5 |
Taper |
MF-T30T |
£5.55 |
|
|
M3 |
0.5 |
Second |
MF-T30S |
£5.55 |
|
|
M3 |
0.5 |
Bottom |
MF-T30B |
£5.55 |
|
|
M3 |
0.5 |
Set of
3 Taps |
MF-T30S3 |
£14.95 |
|
|
Tapping drill for M3 (2.5mm dia) |
MF-DB-025 |
£1.20 |
|
| |
|
|
|
|
|
|
M3.5 |
0.6 |
Taper |
MF-T35T |
£6.50 |
|
|
M3.5 |
0.6 |
Second |
MF-T35S |
£6.50 |
|
|
M3.5 |
0.6 |
Bottom |
MF-T35B |
£6.50 |
|
|
M3.5 |
0.6 |
Set of
3 Taps |
MF-T35S |
£17.55 |
|
|
Tapping drill for M3.5 (2.9mm dia) |
MF-DB-029 |
£1.26 |
|
| |
|
|
|
|
|
|
M4 |
0.7 |
Taper |
MF-T40T |
£5.55 |
|
|
M4 |
0.7 |
Second |
MF-T40S |
£5.55 |
|
|
M4 |
0.7 |
Bottom |
MF-T40B |
£5.55 |
|
|
M4 |
0.7 |
Set of 3 Taps |
MF-T40S3 |
£14.95 |
|
|
Tapping drill for M4 (3.3mm dia) |
MF-DB-033 |
£1.32 |
|
| |
|
|
|
|
|
|
M5 |
0.8 |
Taper |
MF-T50T |
£5.55 |
|
|
M5 |
0.8 |
Second |
MF-T50S |
£5.55 |
|
|
M5 |
0.8 |
Bottom |
MF-T50B |
£5.55 |
|
|
M5 |
0.8 |
Set of 3 Taps |
MF-T50S3 |
£14.95 |
|
|
Tapping drill for M5 (4.2mm dia) |
MF-DB-042 |
£1.56 |
|
| |
|
|
|
|
|
|
M6 |
1.0 |
Taper |
MF-T60T |
£6.50 |
|
|
M6 |
1.0 |
Second |
MF-T60S |
£6.50 |
|
|
M6 |
1.0 |
Bottom |
MF-T60B |
£6.50 |
|
|
M6 |
1.0 |
Set of 3 Taps |
MF-T60S3 |
£17.55 |
|
|
Tapping drill for M6 (5.0mm dia) |
MF-DB-050 |
£1.92 |
|
| |
|
|
|
|
|
M6 Fine Pitch |
|
|
|
|
M6 |
0.75 |
Taper |
MF-T60TF |
£16.60 |
|
|
M6 |
0.75 |
Second |
MF-T60SF |
£16.60 |
|
|
M6 |
0.75 |
Bottom |
MF-T60BF |
£16.60 |
|
|
M6 |
0.75 |
Set of
3 Taps |
MF-T60SF3 |
£44.80 |
|
|
Tapping drill for M6x0.75 (5.0mm dia) |
MF-DB-525 |
£3.78 |
|
| |
|
|
|
|
|
|
M8 |
1.25 |
Taper |
MF-T80T |
£12.90 |
|
|
M8 |
1.25 |
Second |
MF-T80S |
£12.90 |
|
|
M8 |
1.25 |
Bottom |
MF-T80B |
£12.90 |
|
|
M8 |
1.25 |
Set of 3 Taps |
MF-T80S3 |
£34.80 |
|
|
Tapping drill for M8 (6.8mm dia) |
MF-DB-068 |
£3.00 |
|
| |
|
|
|
|
|
|
Tap Wrenches |
| |
Range |
MF Ref |
Price
Each |
|
 |
2-5mm |
MF-TW3 |
£5.55 |
|
|
Tee Handled Tap Wrench with chuck suitable for taps
from M2 to M4, No 4 to No8 UNC and 8BA to 4BA. Especially suited for use
with the smaller diameter taps |
| |
|
|
|
|
 |
2-6mm |
MF-TW1 |
£6.00
£4.95 |
|
Traditional Bar Style
Tap Wrench (110mm long) suitable for taps from M2 to M6, No4 to 1/4" UNC/UNF, and 8BA
to 2BA.
Please note that the image is typical - colours may vary |
| |
|
2-12mm |
MF-TW2 |
£14.50 |
|
Traditional Bar Style
Tap Wrench (155mm long) suitable for taps from M2 to M12, No4 to 1/2" UNC/UNF, and 8BA
to 0BA.
Please note that the image is typical - colours may vary |
This page was last modified on :
November 24, 2021
|
