This page lists our current range of A2 Stainless Steel
'Dog' Point Grub Screws
(also known as socket set screws) to DIN 914
You can scroll down this page to peruse the range, or
use the quick link buttons below to go directly to the thread size you
require
All sizes have hexagon socket ends for driving with
allen keys.
All dimensions are in millimetres including socket A/F sizes
(imperial sizes have been converted to metric).
If you
need a key or hex/ball driver, the correct sizes are listed on each size table,
alternatively you can click on the hexagon symbol in the
tables below and you will be taken to the allen key and ball driver page which
lists a full range of sizes plus other tools.
If the size you require isn't listed or you require
larger quantities (200 plus) please
e mail
us for a no-obligation quotation.
If you're not sure what thread size you need, or need to send us a sample,
please go to our
'Thread Data'
page'.
All prices include 20% VAT
Click
here for details
Metric Thread Pitches |
All our metric grub screws are
standard pitch (metric coarse) as below unless stated otherwise.
For more guidance on screw thread dimensions please click
here |
Thread |
M1.6 |
M2 |
M2.5 |
M3 |
M4 |
M5 |
M6 |
M8 |
M10 |
Pitch (mm) |
0.35 |
0.4 |
0.45 |
0.5 |
0.7 |
0.8 |
1.0 |
1.25 |
1.5 |
|
|
Grub Screws
Metric Dog Point - A2 Stainless Steel - Din 914 |
If the size you require isn't listed
please
e mail
us for a no-obligation quotation.
|